Plasma Cutting Machine
Manual Cutting and Gouging
with FineFocus Plasma Cutting Units
CUTLINE 10G
CUTLINE 20G
CUTLINE 40G
CUTLINE 20W
CUTLINE 40W
| Versatile Application |
 Suitable for straight line cutting, profile cutting and interrupted cutting; for bevel cutting, hole cutting and fusion drilling, scrap cutting in nearly all positions. - Plasma gouging as the clean alternative to carbon arc gouging - advantageous, because no aftertreatment necessary, low heat input, very low distortion. The process easily can be followed visual, noise level and smoke formation are widely reduced.
|
| The units are distinguished by … |
- cutting speed up to eight times heigher than with gas cutting
- excellent cutting results
- due to the Double-Straight Effect both sides of the cut can be used (”Savings Cut”)
- small kerfs, therefore low loss of material and low pollution
- running cutting start as well as running piercing possible, no reference point required
- high longevity of consumables, because of soft-start circuit and directly water-cooled torches, very low
time-wasting for change of consumables
- automatic power increase of pilot arc at work contact
- easy torch change without tools because of central connectors high rate of duty cycle through effective
- cooling; small-sized power sources require low placement space
|
| The choice is with you: water- or air-cooled? |
| Kjellberg Finsterwalde
is the only
supplier of manual
plasma cutting
units with
FineFocus-
technology.
Water cooled
FineFocus-plasma
torches with their
direct cooling principle for the
consumables are
reaching a five
times higher life
time of nozzles and
cathodes. Therefore
we recommend
for constant applications generally the use of water-cooled installations. The result is a considerably reduction of operating
costs. |
| Flexible application of hand torches with various accessories |
Kjellberg Finsterwalde offers a wide range of accessories for all plasma hand torches. There are contact caps and contact nozzles; distance caps and distance holders for template cutting; special nozzles, ceramic caps and shock protectors for the gouging process. The later three items are only to change, when preparing the standard hand torch for gouging, where the torch head is exposed to
extreme heat and physical stress. For the bevelling of plate edges or for preparation of welding seams we are offering special bevel o o caps with 30 und 38 , as well as a bevel cutting attachment with free adjustable bevel angle. When cutting along marking lines a wheel guide is very helpful. At
higher dimensions the Plasma Tractor FE 1 can be used. Circle cutting easily can be performed when using the circle attachment in connection with a magnetic or suction holder for safe circle fixture. |
Template Cutting |
Gouging |
|
Bevel Cutting Attachment |
Bevel Cap |
|
|
Our wide range of accessories enables the operator to solve various cutting problems. Please contact us,
if you need support for your special application. We surely will help you.
Plasma cutting machines series CUTLINE
|
CUTLINE 10G |
CUTLINE 20G |
CUTLINE 40G |
CUTLINE 20W |
CUTLINE 40W |
Mains voltage, 50Hz
(V)
Fuse, slow (A) |
230/400
16/10 |
230/400
35/25 |
400
35 |
230/400
35/25 |
400
35 |
On request:
Mains voltage, 50Hz (V)
Fuse, slow (A) |
500
6
|
500
25
|
500
25
|
500
25
|
500
25
|
Connecting power (kVA) |
8 |
16 |
24 |
16 |
24 |
Protection class |
IP 22 |
IP 22 |
IP 22 |
IP 22 |
IP 22 |
Insulation class |
F |
F |
F |
F |
F |
Open circuit voltage (V) |
275 |
275 |
275 |
275 |
275 |
Cutting current (A) |
30 |
30 / 60 |
60 / 120 |
25 / 50 |
50 / 100 |
Duty cycle (%) |
35 |
50 |
50 |
60 |
60 |
Cutting thickness(1) (mm)
• Quality cut
• Maximum cut |
6
12 |
15
20 |
30
40 |
15
20 |
30
40 |
Plasma gas |
Air |
Air |
Air |
Air |
Air |
Ignition |
High voltage |
High voltage |
High voltage |
High voltage |
High voltage |
Weight (kg) |
38 |
74 |
122 |
84 |
132 |
Dimensions lxwxh (mm) |
320x420x985 |
670x490x880 |
820x490x880 |
670x490x880 |
820x490x880 |
(1) material depending, standard qualities
Technical datas of Manual Plasma Torches
| Torch type for Plasma Cutting Machine |
PB-S10 LH
CUTLINE 10G |
PHT-30 G/L
CUTLINE 20G |
PHT-40 G/L
CUTLINE 40G |
PHT-30 W/L (4)
CUTLINE
20W |
PHT-45 W/L(4) CUTLINE
40W |
Cutting current (A) |
45 |
70 |
120 |
80 |
130 |
Hose parcel length (m) |
4 |
6 |
6 |
6 (10 3) ) |
6 (10 3) ) |
Cooling
Air pressure(MPa/bar)
Air flow (l/min) |
Air
0,4 / 4
90 |
Air
0,5 / 5
100 |
Air
0,5 / 5
130 |
Water
-
- |
Water
-
- |
Ignition |
High voltage |
High voltage |
High voltage |
High voltage |
High voltage |
Plasmavgas Air 2)
Pressure (MPa/bar) Flow (l/min) |
0,4 / 4
15 |
0,5 / 5
17 |
0,5 / 5
20 |
0,5 / 5
25 |
0,5 / 5
25 |
Total air consumption(l/min) |
105 |
117 |
150 |
25 |
25 |
Main arc start |
Full-automatic power increase after workpiece contact through pilot arc. |
Protection circuit |
Protective cap with safety cut-off |
2) pressure and flow rate adaptation to work conditions possible
3) option
4) Plasma torches with FineFocus-system |
